Like all work steps, the polished plaster must be made with quality materials and specific equipment. They are the bests for the polished plastering options now.
Plastic container: Used to mix the mortar
Respect the technical deadlines of each step. Before plastering the wall, it is necessary that the roughing and plastering processes have already been completed. In order for the coating to perform its function correctly, it is very important that the deadlines between the steps of coating execution are respected.
The information below shows the minimum lead times between each of the steps.
- plaster: 3 days
- laying of ceramic plates WITH lime: 21 days after plastering
- laying of ceramic tiles without lime: 14 days after plastering
- grouting of the laying joints: 3 days after laying
- handling of joints with sealant: 7 days after laying
Step by step how to tow wall
With all that has been said so far in mind, the time has come for our step by step how to plaster the wall so that you can move forward in renovating your home. You can go for the more info for the same now.
Before we can get down to earth (literally), we need to sit down and do some calculations to know how much material is needed for the job. For this we must know how to calculate the trace for this project.
How to calculate the trace of plaster
Dash is the unit of plaster mass used for construction. It is usually composed of a 1: 2: 6 ratio (1 60ml cement bag, 2 bags of fine lime and 6 18l cans of sand) for inner walls, and 1: 2: 4 for outer walls, but some Professionals use other formulas to work.
- This amount of stroke is enough to cover 0.15m³ of wall. These are the base numbers that we will use to calculate the amount of material for our plaster.
- The first step is to measure the wall you are going to plaster and calculate the cubic meter of your plaster. Since your wall is rectangular (or square), the formula is simple:
- M³ = height x length x depth.
Applying putty to the wall and moving forward in renovating your home
In the case, the plaster must have a minimum thickness (depth) of 5mm and a maximum of 2cm. The height and length are according to your wall. Next, you should divide the result of this formula by 0.15 to get the amount of strokes needed for your project. Let’s look at an example to solidify knowledge.
Imagine your wall is 5 meters long and 3 meters high. With 2cm thickness of the plaster, the formula looks like this:
- m³ = 3 X 5 X 0.02
- m³ = 0.3.
That is, our wall is 0.3m³. Since each trait covers 0.15m³, we need 2 traces for the production of our plaster (2 bags of cement with 120ml of additive, 4 bags of fine lime and 12 cans of 18l of sand).
Already if you want to make a plaster with only 5mm thick may be enough, if your plaster is already 2cm and is waterproofed the formula would be as follows:
- m³ = 3 x 5 x 0.005
- m³ = 0.075.
Dividing the value by 0.15, we get to 0.5, which is half a dash. We would use only half of the above measurements for a plaster of this thickness.
